دانلود جدیدترین نرم افزار های مهندسی و دانشجویی در همه رشته ها

[mehran_j]

Home Plan Pro 5.2.12.23

این برنامه نیازمند نقشه کشی و تسلط بر طراحی پیشرفته می باشد و با تکیه بر آن می توان به ایجاد Plan های حرفه ای پرداخت . این برنامه با هماهنگی ایجاد شده بیت Keyboard و Mouse و در بر گرفتن ابزار قدرتمند ، امکانات ویژه ای را برای طراحی Plan در اختیار کاربران قرار می دهد . این برنامه دارای نمونه های از پیش تعیین شده می باشد که کار را برای کاربر آسان تر می کند .

Home Plan Pro provides a full array of graphic tool buttons to let you easily pick a tool or action. Once you choose a tool, Home Plan Pro tells you how to use it. You may use the mouse or keyboard, or both, to create your plan.
Home Plan Pro gives you many choices for printing your plans. You may select a specific scale, or elect to have your plan printed at the largest size that will fit on the paper you select.
While there are a number of impressive and powerful CAD programs available, they are more difficult to learn and use than Home Plan Pro. To preserve its intuitive ease of use and low cost, Home Plan Pro is not designed to compete with full-fledged CAD programs.

Home Plan Pro includes the home design tools you need:
* Easily draw arcs, rectangles, circles, lines, and so forth.
* Use the mouse, keyboard, or a combination of both.
* Add scaled dimensions with two clicks.
* Insert doors and windows with equal ease.
* Zoom in or out with a click to work on detailed parts of the plan or to see the whole of it.
* Create Layers that you can make invisible or visible at a click
* Draw a plot plan using metes & bounds. Calculate the area and acreage.

New in version :
* Zoom from 6400' to 1/32"
* Detailed Print Preview
* Draw a Series of Parallel Lines
* Draw Double Walled Rectangles
* Wall Thickness in Fractions
* Windows widths and patterns
* Metes & Bounds
* Prevent Printed Text From Scaling Too Big
* Create a Column of Text
* Snap Grid spacing is saved for each zoom level)
* Speed settings are also saved separately for each zoom level.
* New Zoom Bar buttons provide instant zooming to any level

حجم 3.1 مگابایت
دانلود : لینک مستقیم
دانلود : سریال

[farid_2004]

PLAXIS 3D Foundation-Finite Element Code For Soil And Rock Analyses

GRAPHICAL INPUT OF PROJECTS
A project geometry is modelled using a top view approach. The input of soil data, structures, construction stages, loads and boundary conditions is based on convenient CAD drawing procedures, which allows for a detailed and accurate modelling of the major geometry. From this geometry a 3D finite element mesh is generated.
BORE HOLES
Soil layers are defined by means of bore holes. Multiple bore holes can be placed in the geometry to define a non-horizontal soil stratigraphy or an inclined ground surface. Plaxis automatically interpolates layer and ground surface positions in between the bore holes.
WORK PLANES
Structures are defined in horizontal work planes. Multiple work planes can be defined to create complex foundations, multi-storey basements and relevant parts of the upper structure.
AUTOMATIC MESH GENERATION
The Plaxis 3D Foundation program allows for an automatic generation of unstructured 2D finite element meshes based on the top view. The 2D Mesh generator is a special version of the Triangle generator. There are options for global and local mesh refinement. From this 2D mesh, a 3D mesh is automatically generated, taking into account the soil stratigraphy and structure levels as defined in the bore holes and work planes.
VOLUME ELEMENTS
Quadratic 15-node wedge elements are available to model the deformations and stresses in the soil. Due to non-horizontal soil stratigraphy, these elements may degenerate once to 13-node volume elements or twice to 10-node tetrahedral elements.
BEAMS
Foundations may involve structural objects like walls, floors and beams. A special type of beam element can be used to model slender one-dimensional objects with a significant flexural rigidity. The stiffness of these elements is defined using elastic stiffness properties or non-linear elastic deformation curves.
WALLS AND FLOORS
Special plate elements can be used to model raft foundations, basements, walls and floors of buildings, as well as other parts of structures. The behaviour of these elements is defined using elastic stiffness properties or non-linear elastic deformation curves (M-ê and N-å diagrams).
INTERFACES
These joint elements are automatically added to walls to allow for a proper modelling of soil-structure interaction. Interfaces may be used to simulate, for example, the thin zone of intensely shearing material at the contact between a wall and the surrounding soil. Values of interface friction angle and adhesion that are not necessarily the same as the friction angle and cohesion of the surrounding soil and may be assigned seperately to these elements.
PILES
Circular and square piles can be defined using a pile designer. Solid piles are composed of volume elements whereas hollow piles are composed of wall elements. Pile-soil interaction can be modelled using interfaces around the pile.
LOADS
Plaxis 3D Foundation allows for various types of loads (point loads, line loads, distributed loads) that could be applied in the model. Different loads and load levels can be activated independently in each construction stage. Soil Behaviour:

Soil behaviour back to top
MOHR-COULOMB MODEL
This robust and simple non-linear model is based on soil parameters that are known in most practical situations. Not all non-linear features of soil behaviour are included in this model, however. The Mohr-Coulomb model may be used to compute realistic bearing capacities and collapse loads of footings, as well as other applications in which the failure behaviour of the soil plays a dominant role.
HARDENING SOIL MODEL
As a general second-order model, an elastoplastic type of hyperbolic model is available, which is called the Hardening Soil model. This model allows for plastic compaction (cap hardening) as well as plastic shearing due to deviatoric loading (friction hardening). In comparison with the Mohr-Coulomb model the unloading behaviour of the soil is better taken into account. The Hardening Soil model may be used to calculate realistic pressures below basements and raft foundations and behind soil retaining structures. More detailed information on this model can be found in the Material Models Manual.
STRUCTURAL BEHAVIOUR
Structural behaviour may be defined as linear elastic material orthotropy or as non-linear elastic force-deformation curves. This applies to beams, walls, floors and springs. Geometric orthotrophy of plates with a particular profile can also be emulated to a certain extent.
STEADY-STATE PORE PRESSURE
Complex pore pressure distributions may be generated on the basis of the input of water levels or pore pressure distributions in the bore holes. Plaxis 3D Foundation is a finite element package intended for the three-dimensional deformation analysis of foundation structures. Foundations form the interaction between an upper structure and the soil. Settlements depend on local soil conditions and on the construction method. Especially for pile-raft foundations there is an important interplay between the pile, the raft and the soil to support the forces from the upper structure. In this interplay deformations are a key factor. Such a situation can only be analysed effectively by means of three-dimensional finite element calculations in which proper models are incorporated to simulate soil behaviour and soil-structure interaction. The Plaxis 3D Foundation program offers these facilities. A brief summary of the most important features is presented below.
EXCESS PORE PRESSURE
Plaxis distinguishes between drained and undrained soils to model permeable sands as well as almost impermeable clays. Excess pore pressures are computed when undrained soil layers are subjected to loading. Calculation Features:

دانلود فول برنامه
http://rapidshare.com/files/21916547/Pl3dfo.part1.rar
http://rapidshare.com/files/21917098/Pl3dfo.part2.rar

rarpassword:freeforall

دانلود فایل های آموزشی بصورت PDF

http://www.plaxis.nl/upload/productm...5-Tutorial.pdf
http://www.plaxis.nl/upload/productm...15-GenInfo.pdf
http://www.plaxis.nl/upload/productm...5-Material.pdf
http://www.plaxis.nl/upload/productm...-Reference.pdf
http://www.plaxis.nl/upload/productm...Scientific.pdf
http://www.plaxis.nl/upload/productm...Validation.pdf

دانلود فایل آموزشی بصورت فیلم

http://www.plaxis.nl/upload/productv...Excavation.avi
http://www.plaxis.nl/upload/productv...3df_bridge.avi

http://www.plaxis.nl/upload/productv...uay%20wall.avi

rarpassword:freeforall

Plaxis 3D Foundation ver 1.1 sp3

http://www.4shared.com/file/24745929...rified=c5cd768

http://www.4shared.com/file/24750578...rified=c5cd768

http://www.4shared.com/file/24756281...rified=c5cd768

www.damasgate.com پسورد اسم این سایت است

[amirt1980]

نوشته اصلی توسط mahsmahs

آخرین ورژن ETABS رو می تونید قرار بدید؟

در قسمت انجمن دانشجویان و قسمت نرم افزار این انجمن برای استفاده شما و دوستان دیگه قرار دادم امیدوارم که به دردتون بخورد
http://www.asrejavaan.com/showthread...42#post3221242
با سپاس-امیر

[persia_m]

دوستان لینک بالا از کار افتاده از لینک زیر آخرین ورژن برنامه Etabs را دریافت بفرمایید.

http://rapidshare.com/files/159247475/V9.5_www.4downloader.ir.rar

کرک:
http://www.albreqy.com/engcv/CSI.ETA...5.0.WebCrk.rar

[farid_2004]

Autodesk ImageModeler 2009 build 19053

نرم افزاری حرفه ای و عالی برای رشته های مهندسی طراحی و معماری جهت ایجاد طراح های گرافیکی 3 بعدی

Autodesk® ImageModeler™ image-based modeling and photogrammetry software generates 3D models from 2D digital images, giving architects, designers, and entertainment content creators a new approach to 3D modeling.

Bridging the 2D and 3D worlds, Autodesk ImageModeler enables you to capture the reality as-built, take measurements of buildings, and easily create photorealistic 3D models. Editing, modeling, and texturing tools allow you to further edit, refine, and texture your rendered objects. Your 3D objects can then be exported into different formats




حجم : 47 مگابایت
دانلود فول برنامه + فایل کرک از سایت رپیدشیر دریافت بشود
پسورد اسم این سایت است لطفا فقط تایپ کنید >>> www.2baksa.net

[farid_2004]

bascom 1.11.1.9

BASCOM-AVR is the original Windows BASIC COMPILER for the AVR family. It is

designed to run on W95/W98/NT/W2000, XP and Vista

BASCOM-AVR is the original Windows BASIC COMPILER for the AVR family. It is designed to run on W95/W98/NT/W2000/XP and Vista
Key Benefits

* Structured BASIC with labels.
* Structured programming with IF-THEN-ELSE-END IF, DO-LOOP, WHILE-WEND, SELECT- CASE.
* Fast machine code instead of interpreted code.
* Variables and labels can be as long as 32 characters.
* Bit, Byte, Integer, Word, Long, Single , DOUBLE and String variables.
* Support for the DOUBLE. Not found in any AVR compiler, BASCOM gives you the advantage to crunch huge numbers with the DOUBLE(8 byte Floating Point)
* Large set of Trig Floating point functions.
* Date & Time calculation functions.
* Compiled programs work with all AVR microprocessors that have internal memory.
* Statements are highly compatible with Microsoft’s VB/QB.
* Special commands for LCD-displays , I2C chips and 1WIRE chips, PC keyboad, matrix keyboad, RC5 reception, software UART, SPI , graphical LCD, send IR RC5, RC6 or Sony code.
* TCP/IP with W3100A chip.
* Local variables, user functions, library support.
* Integrated terminal emulator with download option..
* Integrated simulator for testing.
* Integrated ISP programmer (application note AVR910.ASM).
* Integrated STK200 programmer and STK300 programmer. Also supported is the low cost Sample Electronics programmer. Can be built in 10 minutes! Many other programmers supported via the Universal Interface.
* Editor with statement highlighting.
* PDF datasheet viewer
* Context sensitive help.
* Perfectly matches the following boards :
o MAVRIC and the MAVRIC-II from BDMICRO.
o AVR robot controller (ARC 1.1) from L. Barello
o Active Mega8535 Micro Board from Active Robots
The following statements are supported (actually there are many more look in the helpfile):

Decision and structures
IF, THEN, ELSE, ELSEIF, END IF, DO, LOOP, WHILE, WEND, UNTIL, EXIT DO, EXIT WHILE, FOR, NEXT, TO, STEP, EXIT FOR, ON .. GOTO/GOSUB, SELECT, CASE.

Input and output
PRINT, INPUT, INKEY, PRINT, INPUTHEX, LCD, UPPERLINE, LOWERLINE,DISPLAY ON/OFF, CURSOR ON/OFF/BLINK/NOBLINK, HOME, LOCATE, SHIFTLCD LEFT/RIGHT, SHIFTCURSOR LEFT/RIGHT, CLS, DEFLCDCHAR, WAITKEY, INPUTBIN, PRINTBIN, OPEN, CLOSE, DEBOUNCE, SHIFTIN, SHIFTOUT, GETATKBD, SPC, SERIN, SEROUT

Numeric functions
AND, OR, XOR, INC, DEC, MOD, NOT, ABS, BCD, LOG, EXP, SQR, SIN,COS,TAN,ATN, ATN2, ASIN, ACOS, FIX, ROUND, MOD, SGN, POWER, RAD2DEG, DEG2RAD, LOG10, TANH, SINH, COSH.

I2C
I2CSTART, I2CSTOP, I2CWBYTE, I2CRBYTE, I2CSEND and I2CRECEIVE.

1WIRE
1WWRITE, 1WREAD, 1WRESET, 1WIRECOUNT, 1WSEARCHFIRST, 1WSEARCHNEXT.

SPI
SPIINIT, SPIIN, SPIOUT, SPIMOVE.

Interrupt programming
ON INT0/INT1/TIMER0/TIMER1/SERIAL, RETURN, ENABLE, DISABLE, COUNTERx, CAPTUREx, INTERRUPTS, CONFIG, START, LOAD.

Bit manipulation
SET, RESET, ROTATE, SHIFT, BITWAIT, TOGGLE.

Variables
DIM, BIT , BYTE , INTEGER , WORD, LONG, SINGLE, STRING , DEFBIT, DEFBYTE, DEFINT, DEFWORD.

Miscellaneous
REM, ' , SWAP, END, STOP, CONST, DELAY, WAIT, WAITMS, GOTO, GOSUB, POWERDOWN, IDLE, DECLARE, CALL, SUB, END SUB, MAKEDEC, MAKEBCD, INP,OUT, ALIAS, DIM , ERASE, DATA, READ, RESTORE, INCR, DECR, PEEK, POKE, CPEEK, FUNCTION, READMAGCARD, BIN2GREY, GREY2BIN, CRC8, CRC16, CHECKSUM.

Compiler directives
$INCLUDE, $BAUD and $CRYSTAL, $SERIALINPUT, $SERIALOUTPUT, $RAMSIZE, $RAMSTART, $DEFAULT XRAM, $ASM-$END ASM, $LCD, $EXTERNAL, $LIB.

String manipulation
STRING, SPACE, LEFT, RIGHT, MID, VAL, HEXVAL, LEN, STR, HEX, LTRIM, RTRIM, TRIM, LCASE, UCASE, FORMAT, FUSING, INSTR.

And many other functions, statements and directives
To make a program takes just a few steps :

* Write the program in BASIC
* Compile it to fast machine binary code
* Test the result with the integrated simulator(with additional hardware you can simulate the hardware too).
* Program the chip with one of the integrated programmers.
(hardware must be purchased separately)

The program can be written in a comfortable MDI color coded editor.
Besides the normal editing features, the editor supports Undo, Redo, Bookmarks and block indention.

The simulator let you test your program before writing it to the uP.
You can watch variables, step through the program one line at the time or run to a specific line,
or you can alter variables.
To watch a variables value you can also point the mouse cursor over it.

uP TAB of simulator

A powerful feature is the hardware emulator, to emulate the LCD display, and the ports.
The LCD emulator also emulates custom build LCD characters!


It is simple to control various graphical LCD displays.

This is full version,no crack or key
http://rapidshare.com/files/12286805...R_1.11.9.0.rar

[farid_2004]

CSI ETABS NL V9.5.0

نرم افزار ETABS یک نرم افزار مخصوص جهت تحلیل و طراحی سازه های ساختمانی می باشد.قابلیت این نرم افزار جهت تحلیل و طراحی این نوع سازه ها جهت گیری شده اند.تمام المان های یک ساختمان برای برنامه شناخته شده هستند.پردازنده های طراحی برنامه بسیار کامل می باشد و تمام المان های ساختمان را می توان در این نرم افزار طراحی کرد.این برنامه برای سیستم های ساختمانی تهیه شده است.ETABS هنگامی آشکارتر شد که مهندسان سازه تحلیل های غیر خطی استاتیکی و دینامیکی را به صورت عملی مورد استفاده قرار دادند و با پیدایش کامپیوترهای امروزی با قدرت و توان بالا این کامپیوترها برای ایجاد مدل های بزرگتر و پیچیده تر به وسیله مهندسان سازه مورد استفاده قرار گرفتند.


مهمترین قابلیت های تحلیلی برنامه عبارتند از:


شناخت المان های ساختمان و طبقات


محاسبه خودکار جرم و مرکز جرم

انتقال بار های ثقلی از کف ها به تیرها تولید و توزیع بارهای جانبی بین تراز طبقات مدل سازی المان های پوسته ای و رامپ ها

قابلیت های طراحی برنامه نیز شامل موارد زیر می باشند:


طراحی قاب های فولادی


طراحی قاب های بتنی

طراحی دیوارهای برشی طراحی تیرهای مرکب.
برنامه ETABS در طراحی قاب های فولادی و بتنی تمام ضوابط لرزه ای طراحی ساختمان ها را در نظر می گیرد.
در این برنامه می توان قاب های بتنی را بر اساس ضوابط شکل پذیری عادی و متوسط و ویژه طراحی کرد.همچنین در سختمان های فولادی می توان ضوابط ویژه قاب های خمشی عادی و ویژه وسیستم های مهاربندی همگرا و واگرا را در طراحی لحاظ کرد.علاوه بر قابلیت های تحلیل و طراحی فوق برنامه ETABS ارتباط دو طرفه کاملی با نرم افزارهای دیگر دارا می باشد. برنامه ETAB به طور خودکار فایل ورودی SAFE را ایجاد میکند.همچنین برنامه ETABS قابلیت ایجاد فایل ورودی SAP2000 را دارد. در ویرایش جدید ETABS امکان فراخوانی هندسه و خطوط شبکه از نرم افزار اتوکد وجود دارد. امکان فرستادن هندسه و مشخصات دیگر به نرم افزار اتوکد نیز وجود دارد



حجم : 222 مگابایت
دانلود فول برنامه در سه پارت از دو سایت آپلود زیر دریافت کنید .

Rapidshare Part1
Rapidshare Part2
Rapidshare Part3
یا

Easyshare Part1
Easyshare Part2
Easyshare Part3

[123456za]

سلام
کویر دانلود وابسته به سایت کویر الکترونیک اقدام به ساخت پرتابل نرم افزارهای الکترونیک و برق نموده که چند تایی که اماده شده براتون می ذارم
توضیح اینکه این نرم افزارها نیازی به نصب ندارند و فقط با یک کلیک اجرا می شوند در هر سیستمی که باشه!!!



Circuit maker
CCS
و...
برای دانلود کلیک کنید
منبع خبر:کویرالکترونیک

[farid_2004]

MiniTab v15.0.0

يكي از نرم افزار هاي تخصصي آمار و به خصوص كنترل كيفيت مي باشد كه در بسياري از واحد هاي صنعتي بزرگ و كوچك استفاده مي گردد.

يادگيري اين نرم افزار همزمان با اخذ واحد آمار مهندسي در رشته مهندسي صنايع و پس از آن در واحد كنترل كيفيت از طرف اساتيد و آشنايان با صنعت اكيداً توصيه مي شود.

1- آمار توضیحی و توزیع احتمالهای گسسته و پیوست

2 - شبیه سازی داده های تصادفی بر پایهه توزیع ها مختلف
3 - برآورد نقطه ای و فاصله ای و آمارهای آنها
4 - روشهای گرافیکی جهت تشریح داده ها
5 - آزمونهای فرضیه با توجه به اطلاعات در دسترس از جوامع

لینک های آموزشی مربوط به این برنامه روی هر کدام که مایل بودید کلیک کنید .

شروع کار با MINITAB
محاسبات در MINITAB
آزمونهای ناپارامتریک در MINITAB
محاسبه رگرسیون در MINITAB

حجم : 49 مگابایت

دانلود : فول برنامه + ریجستر از سایت رپیدشیر دریافت کنید .
پسورد : chaizak

ملاحظه : بعداز نصب برنامه اینترنت را قطع کنید و با کی میکر سریال ساخته و آنرا ریجستر کنید .

[farid_2004]

Spss 16.1
SPSS (originally, Statistical Package for the Social Sciences) was released in its first version in 1968 after being founded by Norman Nie, then a political science postgraduate at Stanford University,[1] and now Research Professor in the Department of Political Science at Stanford and Professor Emeritus of Political Science at the University of Chicago.[2] SPSS is among the most widely used programs for statistical analysis in social science. It is used by market researchers, health researchers, survey companies, government, education researchers, marketing organizations and others. In addition to statistical analysis, data management (case selection, file reshaping, creating derived data) and data documentation (a metadata dictionary is stored with the data) are features of the base software.

Statistics included in the base software:

* Descriptive statistics: Cross tabulation, Frequencies, Descriptives, Explore, Descriptive Ratio Statistics
* Bivariate statistics: Means, t-test, ANOVA, Correlation (bivariate, partial, distances), Nonparametric tests
* Prediction for numerical outcomes: Linear regression
* Prediction for identifying groups: Factor analysis, cluster analysis (two-step, K-means, hierarchical), Discriminant

The many features of SPSS are accessible via pull-down menus or can be programmed with a proprietary 4GL command syntax language. Command syntax programming has the benefits of reproducibility and handling complex data manipulations and analyses. The pull-down menu interface also generates command syntax, though the default settings have to be changed to make the syntax visible to the user. Programs can be run interactively, or unattended using the supplied Production Job Facility. Additionally a "macro" language can be used to write command language subroutines and a Python programmability extension can access the information in the data dictionary and data and dynamically build command syntax programs. The Python programmability extension, introduced in SPSS 14, replaced the less functional SAX Basic "scripts" for most purposes, although SaxBasic remains available. In addition, the Python extension allows SPSS to run any of the statistics in the free software package R. From version 14 onwards SPSS can be driven externally by a Python or a VB.NET program using supplied "plug-ins".

SPSS places constraints on internal file structure, data types, data processing and matching files, which together considerably simplify programming. SPSS datasets have a 2-dimensional table structure where the rows typically represent cases (such as individuals or households) and the columns represent measurements (such as age, *** or household income). Only 2 data types are defined: numeric and text (or "string"). All data processing occurs sequentially case-by-case through the file. Files can be matched one-to-one and one-to-many, but not many-to-many.

The graphical user interface has two views which can be toggled by clicking on one of the two tabs in the bottom left of the SPSS window. The 'Data View' shows a spreadsheet view of the cases (rows) and variables (columns). The 'Variable View' displays the metadata dictionary where each row represents a variable and shows the variable name, variable label, value label(s), print width, measurement type and a variety of other characteristics. Cells in both views can be manually edited, defining the file structure and allowing data entry without using command syntax. This may be sufficient for small datasets. Larger datasets such as statistical surveys are more often created in data entry software, or entered during computer-assisted personal interviewing, by scanning and using optical character recognition and optical mark recognition software, or by direct capture from online questionnaires. These datasets are then read into SPSS.

SPSS can read and write data from ASCII text files (including hierarchical files), other statistics packages, spreadsheets and databases. SPSS can read and write to external relational database tables via ODBC and SQL.

Statistical output is to a proprietary file format (*.spo file, supporting pivot tables) for which, in addition to the in-package viewer, a stand-alone reader is provided. The proprietary output can be exported to text or Microsoft Word. Alternatively, output can be captured as data (using the OMS command), as text, tab-delimited text, HTML, XML, SPSS dataset or a variety of graphic image formats (JPEG, PNG, BMP and EMF).

Add-on modules provide additional capabilities. The available modules are:

* SPSS Programmability Extension (added in version 14). Allows Python programming control of SPSS.
* SPSS Data Validation (added in version 14). Allows programming of logical checks and reporting of suspicious values.
* SPSS Regression Models - Logistic regression, ordinal regression, multinomial logistic regression, and mixed models (multilevel models).
* SPSS Advanced Models - Multivariate GLM and repeated measures ANOVA (removed from base system in version 14).
* SPSS Classification Trees. Creates classification and decision trees for identifying groups and predicting behaviour.
* SPSS Tables. Allows user-defined control of output for reports.
* SPSS Exact Tests. Allows statistical testing on small samples.
* SPSS Categories
* SPSS Trends
* SPSS Conjoint
* SPSS Missing Value Analysis. Simple regression-based imputation.
* SPSS Map
* SPSS Complex Samples (added in Version 12). Adjusts for stratification and clustering and other sample selection biases.

SPSS Server is a version of SPSS with a client/server architecture. It has some features not available in the desktop version, such as scoring functions

http://rapidshare.com/files/134280641/S16.part1.rar
http://rapidshare.com/files/134280583/S16.part2.rar
http://rapidshare.com/files/134279663/S16.part3.rar